产品搜索

首页 > 真钱捕鱼 > 喷涂设备系列喷涂设备系列

管道内壁喷涂器-1

喷涂设备系列

STR-NKP-1型管道内壁喷涂器  Spraying machine for piping inner wall

适用范围 Applicable scope

适用于小孔及中型管道的内壁涂装,它是利用无气喷涂机输送来的高压涂料,通过特制的喷嘴,使涂料雾化后直接形成喇叭形(园锥形、空心),均匀地喷在管道内表面,从而实现管道的涂装。 NKP-1型主要适用于Ф50-Ф300mm的管道,涂料粘度不得高于80秒(4号福特杯)。如果涂料粘度高于80秒,需加溶剂稀释。NKP-1型基本上不受管道长度限制,但最好不长于15米。

Apply YuXiaoKong and medium pipe wall coating, it is to use it without gas transmission to high voltage coating, through the special nozzle, to make the paint spray directly formed after flared (garden tapered, hollow), evenly spray in the pipe inner surface, so as to realize the pipe coating. NKP-type 1 is mainly used in Ф 50-Ф 300 mm pipe, coating viscosity shall not be higher than the 80 seconds (4 ford cup). If the paint is higher than 80 seconds, viscosity should be diluted solvent. NKP-type 1 basically from piping length restrictions, but had better not longer than 15 meters.

 

喷涂管道内孔范围Spray pipe hole range(mm):Ф50-300

机身长度Fuselage length (mm):Ф50×280()

机身重量Body weight (kg)0.9

涂料控制开关手喷枪重量Coating control switch hand gun weightweight):0.45

 

安装方框图 Installation to which

 

Gas source

 

空气减压阀

Air pressure reducing valve

 

油水分离器

Oil-water separator

 

无气喷涂机

No gas

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

高压软管

High-pressure hose

 

NKP-1 内孔喷涂器

Hole spraying device

 

手喷枪

Hand gun

 

Wards

真钱捕鱼